咸淡水养殖梭鱼的自然繁殖观察和人工繁殖试验     

中国科学院海洋研究所海洋鱼类繁殖研究组 《海洋科学集刊》1978,(14):29-68

梭鱼(Mugil so-iuy Basilewsky)为我国北方咸淡水鱼类人工养殖的主要对象,南方也有养殖,属鲻科鱼类,广泛分布于热带和亚热带水域。其中尤以鲻鱼(Mugil cephalus B.)为甚。由于它们中的大多数种类适盐性广、食物链低、生长快和肉味美,因而成为海水,咸淡水,乃至淡水鱼类养殖的很好对象。主要养于印度-太平洋区域、地中海和黑海沿岸。1969年,在保加利亚瓦尔纳召开的国际生物学计划海洋生产力组(IBP/PM)的会议上,与联合国粮农组织(PAO)一道,把鲻科鱼类列为国际性生物研究课题之一,受到有关国家的普遍重视。近十多年,对于鲻科鱼类的人工繁殖研究,在某些种类上已取得较大进展。鲻梭鱼,可期在几年内,进入种苗的生产阶段。 我国劳动人民对鲻科鱼类养殖至少已有四个世纪的悠久历史,积累了极为丰富的生产经验。但自古以来,都是利用天然种苗进行养殖。近年来,由于大量兴修水利,淡水入海的运流量不断减少,天然种苗场受到某些影响,能捕到的天然苗也不如以往丰盛,加之种苗资源本身因受气象的影响各年也有所变动。为了使生产能按计划进行,人工繁殖种苗已成为当务之急。 1967年,我所和原天津淡水渔业公司工农养殖场合作,对咸淡水养殖梭鱼的人工繁殖开始进行研究。并在人工诱导排卵方面取得成功,所获卵子得到受精和孵化。1968年,中国科学院实验生物研究所的部分同志也参加了这项试验。当年共获得一千万卵子,其中有二百万卵子获得受精。孵苗十四万多尾。因受寒潮影响,大量胚卵在即将孵出前,或在孵出仔鱼之后不久死去。最后仅培育九百余尾达2公分以上的梭鱼苗。这一年的试验,为咸淡水养殖梭鱼的全人工繁殖打开了"通途"。1969年,养殖场由地方移交给部队,我所继而与中国人民解放军某部队进行合作,一直到1972年截止。1969年,室外池塘育苗成活率达30%,育成6厘米以上的梭鱼苗二千尾左右。这些苗经过越冬,到第二年春天,体长达20厘米以上。1972年,经过人工诱导排卵的亲鱼,在池塘中自行产卵和受精,并孵出仔鱼。这对咸淡水养殖梭鱼的人工繁殖来说,又迈开了新的一步。 本文总结了六年来(1967-1972)咸淡水养殖梭鱼人工繁殖试验所取得的初步成果。对咸淡水养殖梭鱼的生物学特性以及自然繁殖也作了初步观察。现将这一材料发表,供有关单位参考。  相似文献   

Prediction of Load Carrying Capacity of Corroded Reinforced Concrete Beam     

范颖芳  周晶冯新 《中国海洋工程》2004,18(1):107-118

A novel method for prediction of the load carrying capacity of a corroded reinforced concrete beam (CRCB) is presented in the paper. Nine reinforced concrete beams, which had been working in an aggressive environment for more than 10 years, were tested in the laboratory. Comprehensive tests, including flexural test, strength test for corroded concrete and rusty rebar, and pullout test for bond strength between concrete and rebar, were condueted. The flexural test results of CRCBs reveal that the distribution of surface cracks on the beams shows a fractal behavior. The relationship between the fractal dimensions and mechanical properties of CRCBs is then studied. A prediction model based on artificial neural network (ANN) is established by the use of the fractal dimension as the corrosion index, together with the basic intbrmation of the beam. The validity of the prediction model is demonstrated through the experimental data, and satisfactory resuits are achieved.  相似文献   

Numerical study of the influence of Kuroshio Current on the thermocline in the sea area around Taiwan Island     

张文静  沙文钰 《海洋预报》2001,18(Z1):17-24

1 INTsoDUcrIONTemperature is one of the most impoFtant essential factors of ocean, and its verticalstructure, especially the phenomenon ofthermocline, is concerned by military and manufacturepractices at all times. There are two classes of research methods for thermocIine, statisticmethod and numerical method. In recent years, more attention has been paid to the latterwhich becomes the primary development direction. Since Munk et al (1948) pot forward1-D model of thermocline at steady sta…  相似文献   

In-Situ Observation of Fluid Mud in the North Passage of Yangtze Estuary, China   总被引：1，自引：0，他引：1  

李九发  万新宁何青应铭  时连强S.M.Hutchinson 《中国海洋工程》2004,18(1):149-156

Observations of fluid mud were made in the lower North Passage of the Yangtze Estuary in February 2000, on 10 -11 August 2000, on 30 - 31 August 2000 (after two strong typhoons), on 21 - 24 August 2000 (neap tide) and on 3 -6 September 2000 (mean tide) respectively. In situ data show that the fluid mud in this area consists of fine cohesive sediment (median size 7.23 μm). The formation and movement of fluid mud varied during the neap-spring and flood-ebb tidal cycle. Observations suggest that fluid mud phenomena in this area may be categorised in a three-fold manner as slack water, storm and saltwedge features. The thickness of the fluid mud layer of slack water during the neap tide ranged from 0.2 to 0.96 m, whereas during the mean tide, the thickness ranged from 0.17 to 0.73 m, and the thickness of the fluid mud layer was larger during slack water than at the flood peak. Shoals cover an area of 800 km^2 with a water depth smaller than 5 m. Erosion of these extensive intertidal mudflats due to storm action provides an abundant sediment source. This is particularly significant in this estuary when the tidal level is lower than 5 m. The lower North Passage is a typical zone of saltwater wedging, so the saltwedge fluid mud has the most extensive spatial range in the estuary.  相似文献   

碳水化合物的组合合成     

王群  于广利 《中国海洋大学学报(自然科学版)》2001,31(1):45

碳水化合物的组合合成是一项新兴技术，该技术可以在短时间内合成大量用于进行生物活性筛选的寡糖及拟糖物。液相与固相合成技术可以极大地加快药物研究与开发进程。作者针对该技术在碳水化合物合成方面的研究进展情况进行讨论。  相似文献   

The Effect of Internal Fluid on the Response of Vortex-Induced Vibration of Marine Risers   总被引：5，自引：1，他引：5  

郭海燕  王元斌傅强 《中国海洋工程》2004,18(1):11-20

Based on Iwan‘s wake oseillator model developed with the classical van der Pol equalion, the differential equation for the response of the vortex-induced vihration (VIV) of the riser considering the effect of the internal flowing fluid and the external marine environmental condition is derived. The effect of the intermal flowing fluid on the response of VIV of the riser is studied by means of the Finite Element Method. The results show that the effect of the internal fluid velocity on the VIV of the riser is strong when the natural frequency of the riser is close to the vortex shedding frequency. In addition, the increase of the top tension can decrease the sensitivity of the riser to the internal fluid velocity.  相似文献   

Design of Mooring System for Oil Storage Vessels     

LI  Wen-long 《中国海洋工程》2003,17(4):541-550

The floating oil storage system has been proposed as a new facility for Strategic Petroleum Reserve (SPR) in China. Mooring is one of the key technologies to ensure the safety, reliability, and performance of the oil storage system. This paper describes the concept, analysis, design and reliability of the mooring system. For mooring system design of these oil vessels, analysis is essential of the behavior of the vessel in connection with mooring facilities of nonlinear resilience. A nonlinear mathematical model for analyzing a moored vessel is established and solved. Some results of numerical simulations are presented. Assessment of the safety regarding the mooring system in terms of failure probability is carried out. Another simulation model for calculating the failure probability of the mooring system is proposed. The design parameters that have an influence on the characteristics of the failure probability have been identified. The simulation results show that the mooring system has an annual reliab  相似文献   

Second-Order Wave Diffraction Around 3-D Bodies by A Time-Domain Method   总被引：1，自引：1，他引：1  

BAI  Wei 《中国海洋工程》2001,(1):73-84

A time-domain method is applied to simulate nonlinear wave diffraction around a surface piercing 3-D arbitrary body. The method involves the application of Taylor series expansions and the use of perturbation procedure to establish the corresponding boundary value problems with respect to a time-independent fluid domain. A boundary element method based on B-spline expansion is used to calculate the wave field at each time step, and the free surface boundary condition is satisfied to the second order of wave steepness by a numerical integration in time. An artificial damping layer is adopted on the free surface for the removal of wave reflection from the outer boundary. As an illustration, the method is used to compute the second-order wave forces and run-up on a surface-piercing circular cylinder. The present method is found to be accurate, computationally efficient, and numerically stable.  相似文献   

不同产地龙须菜光合色素的比较研究   总被引：7，自引：0，他引：7  

张学成  王永旭 《海洋湖沼通报》1993,(1):52-59

龙须菜是一种重要的产琼胶海藻。本文分析了从青岛、石岛、龙须岛采集的龙须菜的光合色素组成、光谱特性、光合作用速率及生长速度,从而研究扑光色素的组成与光合作用、生物物质积累之间的关系。三个龙须菜的产地之间相距上百里到几百里,彼此之间进行遗传物质交流的机会较少,存在着地理隔离的可能性。本研究表明,不同产地龙须菜光合色素的组成有差异:青岛的材料藻红蛋白含量较高,石岛及龙须岛材料叶绿素α含量较高。不同产地的材料荧光光谱也有差异。与其他产地的材料相比,龙须岛材料光补偿点较低,生长速度较快。本文对今后的生产需要提供了一些生物学参数。  相似文献   

Non-Simultaneous Failure of Ice in Front of Multi-Leg Structures   总被引：4，自引：1，他引：4  

SHI  Qingzeng 《中国海洋工程》2002,16(2):183-192

Because the multi-leg jacket structure is the major type of offshore structures in the Bohai Sea, the study of non-si-multaneous failure of i鏴 on multi-leg structures is important. However, the non-simultaneous failure has not been consid-ered in engineering design until now, obviously resulting in costly design and notable waste. To resolve this problem, this paper, by means of analysis of experimental data, calculates the coefficient of the non-simultaneous failure for the double-pile structure, the square four-leg structure, the single-line multi-pile structure, and the conical structure, respectively, and provides some reference criteria for engineering design.  相似文献